Dry magnetic separator has a large gradient of magnetic field gradient

This paper briefly introduces the status of research on the stability of tailings dams at home and abroad, and introduces the project overview and on-site investigation of the beneficiation process of the Jinyedian iron ore tailings dam of Jinshandian Iron and Steel Co., Ltd., and conducts a detailed inspection of its operating conditions. The related theory of stability calculation of tailings dam includes limit equilibrium method, numerical simulation method, uncertain method and so on. According to the tailing dam geological exploration report, five calculated profiles were selected to determine the relevant material parameters. The GEO-SLOPE software, which is widely used in geotechnical engineering, was used as a tool for three elevations of 60m, 75m, and 100m. The stability is analyzed and calculated, the potential slip plane is obtained, the small safety factor is calculated, and the current and future safety conditions of the tailing dam are mastered. On this basis, specific reinforcement measures and preliminary height-increasing expansion plans are proposed. The tailings dam was monitored for one year's displacement, and the displacement of the dam body was analyzed based on the previous monitoring results. The stress and displacement of the dam body were analyzed using the finite element software SIGMA. The calculated results were in good agreement with the actual monitoring results.

Xinyu Concentrator and Fushun Longji Magnetoelectric Equipment Co., Ltd., on the basis of continuous analysis, summarization and testing, introduced roll-to-roll crusher manufacturers to replace LGCS-718 dry magnetic separators to replace traditional permanent magnetic drum type magnetic separators. LGGS-718 dry magnetic separator has the characteristics of high magnetic field gradient and large selection area. The magnetic system has a wrap angle of up to 1800. The surface of the drum is accompanied by a wear-resistant ceramic sheet. When the ore crushing particle size reaches 1O - 15 mm, the sorting effect is excellent. The LGGS-718 dry magnetic separator has a good sorting effect on ultra-poor magnetite, which can effectively improve the quality of the top-grade concentrate of ultra-poor magnetite.

Graphite Tube

Mishan Graphite Mold factory produces graphite tubes with diameter of 2-280mm and length of 30-2000mm.Carbon graphite tube is widely used in metallurgy, chemical, electrical, mechanical and other industries.
Graphite Product materials includes all kinds of graphite material, such as: isostatic graphite pipe, high purity graphite mold, molded graphite tube dies, extruded graphite tube, vibration molded graphite, expanded Graphite Ring, impregnated graphite mold,
The graphite technical characteristics of graphite tube: high temperature resistance: graphite material is one of the most known high temperature resistance materials.edm graphite tube melting point is 3850℃C± 500C, boiling point is 4250℃C, under the ultra high temperature arc, graphite at 7000℃ for 10 s in a continuous graphite loss is the least, and at 20℃C loss of 0.8%.
It can be seen that the high temperature resistance of graphite tube is excellent.

Graphite Tube,Graphite Pipe,Resin Graphite Carbon Tube,Resin Graphite Tube

Huixian City Mishan Graphite Jip Co., Ltd. , https://www.msgraphitemold.com