Casting Parts,Die Casting Parts,Casting Small Parts,Precise Casting Parts Tuopu Industry(Jiangsu) Co., Ltd. , https://www.tuopu-industry.com
One of the most significant enhancements from the Elios 2 to the Elios 3 is the integration of a LiDAR sensor, which enables the creation of detailed 3D maps. This LiDAR technology allows users to generate real-time 3D Live Maps as the drone navigates through confined spaces, as illustrated in the image below. Additionally, this collected data can be utilized later to produce highly accurate survey-grade 3D models using specialized software from Flyability's partner, GeoSLAM.
*The 3D Live Map appears in the lower-right corner of the tablet screen.*
Since introducing the Elios 3, we've received feedback from inspectors worldwide who say that the new 3D mapping capability is transforming their work in confined spaces. These 3D maps empower inspectors to:
- Accurately locate defects within assets.
- Operate in environments where dust obscures the drone's visual feed.
- Measure stockpiles more quickly, cost-effectively, and safely.
- Ensure comprehensive coverage when inspecting uniform spaces like tanks and boilers.
Even with this positive response, we recognize that some inspectors are still exploring how best to leverage 3D mapping in their day-to-day operations. To provide more practical examples, here are six real-world applications of 3D mapping with the Elios 3 in confined spaces.
### 1. Assisting in the Decommissioning of an Old Power Plant
**Industry:** Power Generation
At a decommissioned power plant owned by Vattenfall, personnel employed the Elios 3 to create 3D models within restricted zones deemed unsafe for human entry. This effort significantly enhanced their understanding of hazardous areas. The Elios 3 successfully mapped these regions both in real time during flight and afterward using post-flight LiDAR data processed with GeoSLAM’s 3D modeling tools.
[Watch Video](#) | [Read Full Case Study](#)
---
### 2. Identifying the Source of an Ore Pass Blockage
**Industry:** Mining
A large mining operation utilized the Elios 3 to swiftly detect the source of a blockage in an ore pass, accomplishing this task in only ten minutes. This rapid identification enabled them to pinpoint the exact location of the obstruction and visualize it within a 3D model. For two months prior, they had attempted to locate the issue by drilling exploratory holes up to 21 meters deep without success. After visiting the site, Flyability’s pilots were able to gather crucial data using the Elios 3’s 3D mapping capabilities, providing valuable insights for clearing the blockage.
[Watch Video](#) | [Read Full Case Study](#)
---
### 3. Enhancing Efficiency in Stockpile Measurements at a Cement Plant
**Industry:** Cement
A leading cement plant in France harnessed LiDAR data from the Elios 3 for stockpile measurements of clinker inventories, improving both safety and precision. Within half an hour—ten minutes for data collection and twenty for post-processing with GeoSLAM Connect—the plant operators achieved an accurate stockpile measurement despite severe dust conditions reducing the camera’s visibility. The Elios 3’s 3D Live Map ensured smooth data collection even under challenging circumstances.
[Watch Video](#) | [Read Full Case Study](#)
---
### 4. Mapping Unknown Areas of an Old Quarry
**Industry:** Mining
Luxembourg’s Mines, Mining, and Quarries department used the Elios 3 to create 3D maps of an abandoned slate quarry being converted into a museum. Traditional methods like handheld LiDAR scanning proved difficult, while aerial photogrammetry would have been slow and complex. Thanks to the Elios 3’s LiDAR sensor, authorities completed comprehensive 3D maps of all the quarry’s chambers efficiently and effectively.
[Watch Video](#) | [Read Full Case Study](#)
---
### 5. Planning Maintenance and Monitoring Changes Over Time in Water Infrastructure
**Industry:** Water/Wastewater Infrastructure
Lausanne’s Water Department spent several months employing the Elios 3’s LiDAR data to generate precise 3D maps of their assets. These maps facilitated planning, tracking changes over time, and executing critical maintenance tasks. The Elios 3’s 3D maps include the exact geolocation of identified defects, enabling inspectors to revisit specific locations for future monitoring. This advanced technology eliminated the need for inspectors to enter potentially dangerous confined spaces to collect data.
[Watch Video](#) | [Read Full Case Study](#)
---
### 6. Improving Safety and Accuracy for Stockpile Measurements at a Salt Mine
**Industry:** Mining
Mining engineers at a German salt mine relied on LiDAR data from the Elios 3 to compute stockpile measurements, enhancing both safety and accuracy. Manual volume calculations required surveyors to ascend the salt piles, posing risks associated with working at heights. With the Elios 3, surveyors remained grounded while collecting all necessary data, making the process faster and safer. Furthermore, the 3D models produced offered superior accuracy compared to traditional manual methods.
[Watch Video](#) | [Read Full Case Study](#)
---
If you’re curious to learn more about the Elios 3, consider watching a live demo today!
*Stay tuned for further updates and insights into how drones and advanced mapping technologies are reshaping industries globally.*