Summer is characterized by fierce sun and unexpected heavy rain. Many people will get wet due to heavy rainfall. Heavy rain affects not only people but also vehicles. Many vehicles will fail after heavy rain, and the movement must be performed. Check maintenance so that it can play a positive role again. Sewage suction vehicles are commonly used in urban sanitation. How do you maintain the sewage suction truck after heavy rainfall? Xiaobian introduces some methods for you. Maintenance of sewage suction truck after heavy rain 1. Check the oil in the suction car to see if it has been carried out. If the oil enters the water, its function will change, and it will no longer be lubricated. If the engine is not lubricated with oil, it will wear out and be damaged. 2. Check the suction wheel's gearbox to see if there is gearbox inside. If the gearbox is filled with water, its gear oil will not function properly after it has gone bad. There will be gear damage and wear accidents. 3. Check if the electric line connector of the sewage suction truck is not immersed in water. If soaked, it will rust and cannot provide normal operation. 4. The brake fluid of the suction truck also needs to be inspected to ensure that there is no water in the brake fluid and it will not cause its internal deterioration. 5. If there is water in the exhaust pipe of the suction truck, it needs to be discharged in time to avoid affecting the catalytic converter and oxygen sensor. 6. Check if there is water in the battery of the suction truck. If there is water, replace the battery or electrolyte in time. 7. If the articles such as seat covers and floor mats of the sewage suction vehicle are blistered, they need to be dried in time under the sun to avoid long-term accumulation of mildew. 8. It is necessary to be able to re-clean the surface of the vehicle once. Although heavy rain has washed all dirt on the surface of the vehicle very cleanly, there may be leaves, silt, etc., which need to be washed away. There is also the possibility that the chassis will be washed. When it is splashed with water, it is necessary to erase the water traces on the chassis and then perform anti-rust treatment. 9. Open all the openable parts of the vehicle's door, trunk, etc. to make it completely ventilated and breathable.
Coil Straightener feeder with compact design are preferred to be used in case of only small available space as well as in case of less delicate coil material with big material square. They normally are used at middle-sized feeding lengths and middle-sized number of press strokes per minute.
Coil Straightener Feeder Press Room automation, Coil Straightener feeder,NC leveler Feeder, Unwinding leveling feeding,Coil Feeders and Straighteners, Sheet metal stamping line,Automatic feeding line Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com
Coil Straightener Feederare composed of a Decoiler Straightener unit and NC Servo Feeder unit and are particular suitable for profiling, Metal Stamping Press line, roll forming line, laser cutting, shear and many other machining processes.
By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for a (very often long) material loop of straightened material can be saved..
The feeder-straightener is supplied with material out of a (in comparison) very small loop of not straightened material below the Decoiler .
Coil Straightener Feeder is suitable for automotive industry, automobile stamping, appliances manufacturing, computer and electronic components, hardware and metal parts/Metal Fabrication/Precision Metal Stamping industry etc industry. Such as Bracket, Damper, brake Pad, Tie Bar, Electric Accessory, Shell Parts Of Printers, Computer Frame,Slide Rail of Car Seat, Splash Shield of car body and etc.