I think this problem is the problem that all sprinkler masters want to know. The bigger the better the sprinkler is, the better the user always wants to use the sprinkler and the use process. In actual use, it would be too short to sprinkle water, increase the number of water additions, increase the fuel consumption for air-carrying and re-entry operations, increase expenditures, and have poor social and economic performance. The main function of the sprinkler operation is to reduce the heat and cool the air and press the dust to purify the air. If the amount of water is too large, partial water will accumulate due to the unevenness of the ground, and part of the water will flow into the sewers along the way. This will cause water resources and economic waste. If there is much mud on the ground, muddy formation is likely to occur. This is caused by the adhesive tape of the vehicle tires. The extension of ground pollution, after the ground dries up, forms a larger area of ​​dust and sludge. The resulting topic is that watering operations should be carried out after the ground has been cleaned, and it is more difficult to sweep if the ground is heavily polluted. The amount of watering is not good. So sprinklers should avoid this problem. (In addition, the sprinkler can freely adjust the amount of water. The high-pressure device of the sprinkler can scavenge the front surface and then sprinkle the water after spraying. This will not allow water and debris to be mixed together. The sanitation workers only need to Sweep the pavement on both sides) The CNC ultra-high pressure Water Jet Cutting Machine is the unique cold cutting new technology in the world, and has an unparalleled lead in the field of material cutting. Compared with other processing technologies, such as flame cutting, plasma cutting, laser cutting, EDM cutting, cnc milling, water cutting does not produce harmful gases or liquids and does not generate heat on the surface of the workpiece. Waterjet Cutting is truly versatile, efficient, and cold-cutting. Water cutting directly uses the kinetic energy of the abrasive water jet to cut the metal to achieve the perfect cutting purpose. no chemical change during the cutting process, no influence on the physical and chemical properties of the cutting material, no thermal deformation, narrow slit, high precision, smooth cut surface, clean and pollution-free, and can process traditional processing and Other processing methods can't process or hard to process materials, such as glass, ceramics, composites, reflective materials, chemical fiber, heat sensitive materials. Water Jet Cutting Machine Water Jet Cutting Machine,Car Washer,Waterjet Cutting Machines,Water Jet MachineWaterjet Parts,Waterjet Spare Parts,Water Jet Cutter,Yc Waterjet HARBIN QIAN FAN XI FENG MACHINERY CO.LTD , https://www.waterjetwamit.com
water jet cutting machine advantages showing:
(1) The roughness of when cutting metal is 1.6μm, and the cutting precision is ±0.10m, which can be used for precision forming cutting;
(2) No reflection effect and edge loss in the cutting of non-ferrous metals and stainless steel;
(3) only need one time to cut carbon fiber composite materials, metal composite materials, metal composites with different melting points and non-metals;
(4) Cutting of low melting point and flammable materials, such as paper, leather, rubber, nylon, felt, wood, explosives, etc.;
(5) Cutting under special site and environment, such as underwater, flammable gas environment;
(6) Cut high hardness and insoluble materials, such as stone, glass, ceramics, cemented carbide, diamond, etc.
Chinese water jet cutting machine now is widely used in all over the world, our waterjet cutter has been exported to more than 15 countries yet, and can provide local service in USA, CHILE,AUSTRILIA,VIETNAM, TURKEY,RUSSIA,UK,INDONESIA. we hope our waterjet cutting machine can bring more customers more business and give you perfect cutting suggestion.