KONE Elevator Spare Parts, KONE Elevator Parts, KONE Lift Spare Parts, KONE Lift Parts
KONE Oyj (officially typeset KONE and pronounced /koʊneɪ/), founded in 1910 and headquartered in Helsinki, Finland, is an international engineering and service company employing some 49,000 personnel worldwide. The firm is the 4th largest manufacturers of elevators and escalators worldwide, and also provides maintenance services and modernization. In addition, KONE builds and services automatic doors and gates. The company provides local service for builders, developers, building owners, designers and architects in 1,000 offices in over 50 countries.Since 1924, KONE has been owned by one of Finland's wealthiest families, the Herlin family. After Harald Herlin purchased the company in 1924, he served as its Chairman until 1941. Afterwards, his son, Heikki H. Herlin, took over his father's post from 1941–1987. Control of the company was then handed down to his son, Pekka Herlin, which he retained from 1987–2003. The current Chairman of KONE's Board of Directors from 2003 onwards is Antti Herlin, the son of Pekka Herlin.
In the Finnish language Kone means "machine" or "device".
In June 2013 the company launched a new high-rise elevator technology, called 'KONE UltraRope', which enables future elevator travel heights of 1 kilometre. The product is light due to its carbon fibre core and a high-friction coating. Because of these qualities, elevator energy consumption in high-rise buildings can be cut significantly.
The 'KONE EcoDisc motor', used for hoisting, reduces the amount of energy lost as heat. The motor control system and brakes make the elevator ride quiet and the design frees up space.
The 'KONE MonoSpace' for low- to mid-rise buildings is the world`s first machine-room-less elevator.The 'KONE EcoSpace' elevator is a machine-room-less traction elevator designed for low-rise buildings from 2 to 15 stories as an energy-efficient alternative to hydraulic elevators, and can fit in an existing hydraulic elevator hoistway. It is produced in a 150 feet per minute (0.76 m/s) speed, 200 feet per minute (1.0 m/s) and 350 feet per minute (1.8 m/s) variants.The 'KONE MiniSpace' elevator with a small machine room is often used in high-rise buildings.
'People Flow' is a registered trademark of KONE Corporation.
KONE Elevator Spare Parts KONE Elevator Spare Parts, KONE Elevator Parts, KONE Lift Spare Parts, KONE Lift Parts CEP Elevator Products ( China ) Co., Ltd. , https://www.elevatorcomponent.nl
1. The common forms of rigid body current collectors are single brush rigid body current collectors and double brush rigid body current collectors. The two current collectors do not have the same conductivity. The double brush collector has better electrical conductivity. Rigid body collectors mainly consist of carbon brushes and brackets. The carbon brush components are mainly copper and graphite. Some manufacturers use brass and some use copper. The material is not the same as the conductivity of the material will produce production, copper is relatively good.
2. Rigid body collectors are mainly used with rigid body contact wires. The rigid body contact lines must be kept horizontal during installation. If the follow-up is due to force majeure, causing them to bend, etc., their current collectors should be changed according to their circumstances. area size.
3, rigid body collector in the installation of mobile devices, contact with the rigid body contact line, to maintain a certain pressure, but also to ensure that not too much pressure, so as not to wear too fast brush.
Model Nominal Amp Load A Upward Pressure Mass kg Lateral Pressure Mass kg Down Pressure Mass kg JDK--300 300 10.4 9.8 9.5 JDK-400 400 11.5 10.8 9.8 JDK-600 600 19.5 17.8 16.9 JDK-1000 1000 21.8 20.2 18.9
JDK rigid body contact wire collector 
KONE UltraRope
KONE EcoDisc motor
Elevators
Other trademarks
Rigid Body Sliding Line Collector is the power take-up device on the high-temperature rigid body glide line. This product is an easy-to-consume part and should be used during the application process. This article briefly introduces this.