ZAMAK is a family of alloys with a primary base metal of zinc and alloying elements of aluminium, magnesium and copper. Zamak alloys are part of the zinc aluminium alloy family. ZAMAK alloys are commonly used for Zinc Die Casting applications. Zamak Die Casting,Pressure Die Casting,Pressure Die Casting Machine,Low Pressure Die Casting Chongqing Jin Te Rui Machine Co.,Ltd , https://www.die-casting-machine.com
The accuracy of the sewage electromagnetic flowmeter is fully verified to determine the accuracy of the electromagnetic flowmeter in the application process of the waterworks and to ensure that the measurement data is authentic and reliable or whether the electromagnetic flowmeter is replaced. Visual inspection and instrumentation methods are used to check whether the excitation coil resistance of the sensor, the insulation resistance between the signal lines, and the grounding resistance are in compliance with the pre-factory standards. Does the zero point of the electromagnetic flowmeter converter and the output current meet the accuracy requirements? .
The influence of the external environment of the sewage electromagnetic flowmeter, such as the laying of the same line of the excitation line and the signal line, the excitation line and the signal line and the high voltage cable, and the influence of factors such as large transformers or motors around on the accuracy of the electromagnetic flowmeter are evaluated. This evaluation mainly uses the visual inspection method to observe whether the electromagnetic flowmeter in operation is in a state of abrupt change or fluctuation. It is roughly judged whether the electromagnetic flowmeter is disturbed by electromagnetic waves or other stray waves or whether there are bubbles in the pipeline.
Sewage electromagnetic flowmeter
Sewage electromagnetic flowmeter must be used continuously online, it is almost impossible to dismantle and transport it to the National Measurement Center for verification. Therefore, it is necessary to verify the accuracy of large-diameter electromagnetic flowmeters used in the field. The verification of the accuracy of the electromagnetic flowmeter is very useful for the management of the electromagnetic flowmeter to ensure its accuracy and reliability, and to accumulate the original comparison data. It is also very useful for future verification and verification. The verification of the accuracy of the electromagnetic flowmeter can use the clear water tank volume and electromagnetic flowmeter calibration equipment.