Fiber laser cutting machine is a new type of cutting equipment, which is more excellent than the traditional metal laser cutting machine, and its application in the industry is becoming more and more widespread. At present, the fiber laser cutting machine has been used in the industry to form a range, so that the scope of What influence does the application have on industrial consumption? Let's take a closer look at it.
Tube Sttler,also named Hexagonal honeycomb packing.The hexagon honeycomb packing lamella plate clarifier Tube Settler is very suitable in all different clarifiers and removing sand. It is regarded as universal water treatment equipment in water supply and drainage engineering. It has wide application, high handling efficiency, small area, etc.
It is suitable in removing sand in inlet, industry and drinking water precipitation, separation in oil & water.
The material of tube settlers are PP and PVC.And the size also could be customized according to your requirements.
Tube Settler Specifications:
Size
(mm)
Pieces
(m2)
Thickness
(mm)
Weight
(Kgs/m2)
Specific Surface Area
(m2/m3)
Φ25
62pc
0.40
30
139
0.45
35
139
Φ35
42pc
0.40
22
109
0.45
25
109
0.50
28
109
Φ50
30pc
0.40
16.5-17
87
0.45
17.5-18
87
0.50
18.5-19
87
0.60
22
87
Φ80
19pc
0.70
19.5
50
0.80
22
50
Tube Settler Tube Settler,Hexagonal Tube Settler,Pp Tube Settler,Pvc Tube Settler,Inclined Plate Settler Hebei Long Zhuo Trade Co., Ltd. , http://www.hblongzhuo.com
With the occasional increase in the power of fiber laser cutting machines, fiber laser cutting machines can be used in industrial cutting applications. For example: Micro-cutting stainless steel arterial tubes with a fast chopper continuous fiber laser cutter illustrates this is an excellent micro cutting tool. In the cutting experiment, a simple pump diode evoked a permissible chopping frequency of up to 3000 Hz. Due to its high beam quality, fiber laser cutters can achieve very small focus diameters and the resulting small kerf width is refreshing the standards of today's medical device industry.
In the medical device industry, there is a huge demand for micro-cuts in metal laser cutting machines. Currently used in this category is the low cost lamp-pumped solid-state laser. However, in order to meet the need for improved scrap rate, laser reliability, and less manual maintenance from time to time, it is difficult to continue to keep this traditional laser system to comply with the consumption environment of modern industrial applications. The advent of fiber laser cutting machines has provided many advantages to maintain high growth and high output. The single-mode fiber laser cutting machine does not require the mirror to focus, no longer needs the replacement of the flash, intact and maintenance-free, the compact air-cooled design also saves the expensive ultra-clean factory space.
The fiber laser cutting machine, a compact, air-cooled, "embedded" device, is suitable for almost any consumer line and has features that do not require changing parts and maintenance for many years. The extremely high beam focusing performance provides an ultra-high power density for a wider range of applications over an effective working distance. ? 
