Dongfeng 15 days gas compressed garbage truck

Vehicle name:

rubbish truck

Vehicle category:

VIP Car

Chassis model:

EQ1165GQNJ

Manufacturer:

Xigong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd.

Factory address:

Suizhou Special Economic Zone JI Liang Road No. 9

engine model:

NQ180N

Engine power:

132

engine capacity:

5638

Engine manufacturer:

Dongfeng Nanchong Automobile Co., Ltd.

Overall dimensions ( length / width / height ) :

8470 × 2490 × 3250

Cargo bed ( length / width / height ) :

× ×

Total mass (Kg) :

159000

Fuel type:

CNG

Curb weight (kg) :

8705

Rated mass (kg) :

7000

Approach angle / departure angle:

22/12

Front / rear suspension:

1430/2540

Wheelbase (mm) :

4500

Axle load:

5900/10000

Number of tires:

6

Tire specifications:

9.00R20

Front track:

1910

Rear track:

1800

Chassis configuration:

Dongfeng 153 flat row of half-cab, Datong 6- speed gearbox with power steering, air brake, 3.6 tons front axle, 9 tons rear axle, 9.00R20 wire tire.

Dedicated configuration:

1. The volume of the car body is approximately 14 cubic meters. The car body is made of 5mm GB carbon steel sheet and consists of a hydraulic mechanism composed of a charging mechanism, a compression mechanism, a unloading mechanism, an oil pump, an oil tank, and a control valve. The loading mechanism is composed of a bracket, a connecting rod mechanism, a cam, a hook, etc. Under the action of the oil cylinder, the garbage in the trash can is automatically inverted and poured into the hopper.

2. The entire vehicle adopts electromechanical and hydraulic integration technology, and uses a machine, electricity, and hydraulic linkage control system to realize the dumping, crushing, and flattening of garbage by means of fillers, push shovels, etc., and pushes garbage into the cabin and presses it. Real and evasive. Sewage collection box at the bottom of the filler, the sewage in the trunk can flow into it, and can be discharged through the ball valve when the trash is unloaded.

3. Imported parts are used for key components, which have the advantages of high pressure, good sealing, convenient operation and safety. The loading cycle is a one-stroke operation of the imported PLC . The hydraulic control operating system is an electric control and a manual control. The manual control is to prevent the electronic control from malfunctioning even when it is malfunctioning.