Moto Iridium/Platinum Spark Plug Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive. Moto Spark Plug,Moto Iridium Spark Plug,Iridium Vehicle Spark Plug,High Quality Moto Spark Plug LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.jmmotorplugs.com
Calorimeter use additives should pay attention to the problem:
1) The known calorific value of benzoic acid, standard coal, and mirror paper can all be used as additives.
2) The tested coal sample and additives should be mixed evenly to keep the sample uniform.
3) The sum of the weights of the tested coal samples and additives should be about 1 gram, and the total calorific value should not be lower than 18000J, nor should it be higher than 30000J.
4) Before the experiment, enter the calorific value (J/g) of the additive in the calorific value of the additive set in the system. When testing, enter the weight of the additive in the corresponding column. At the end of the test, the microcomputer calorimeter will automatically subtract the calorific value of the additive from the result.
Calorimeter barrel level is not enough:
Solution: (1) The drain valve leaks, clean or replace the drain valve to prevent plugging (2) The outer bucket is not pumped full of water. The outer bucket pump is full and cannot overflow.
Calorimeter when using additives, in order to not affect the normal use of the calorimeter, operation, usually need to pay attention to the following questions: