With the increasingly fierce competition in the market economy, more and more enterprises are beginning to realize how to improve efficiency, improve product quality, reduce costs and increase market competitiveness, which is an urgent problem to be solved in the current survival and development of enterprises. Reasonable and effective cost control has become the key to the survival and development of enterprises.
CNC cutting machine has the advantages of high degree of automation, easy operation, high efficiency, high precision, improved sheet utilization, material saving, and low labor cost, making CNC cutting machine one of the must-have equipments necessary for modern production and cutting.
Laser Metal Cutting Machine,Thick Sheet Plasma Cutting Machine,Thick Sheet Cutting Machine,Thick Plate Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com
The CNC cutting machine is controlled by computer digital program, which makes the power drive system, mechanical actuators, cutting process mechanism and so on work according to the processing procedure. It combines high efficiency and high precision through the combination of precision mechanical transmission, oxygen and gas cutting technology. Highly reliable continuous, fully automated thermal cutting equipment for complex shapes on a variety of panels.
Recently, the cutting machine cleaning tool of the pumping department of the concrete machinery company has been fully utilized. Its efficient and quick effect has been welcomed by the workshop staff and become the “big star†of the workshop.
There are more than ten sets of fine cutting machines and underwater cutting machines in the pumping department of the concrete machinery company. The daily maintenance time of each cutting machine takes about 30 minutes. Weekly maintenance requires diesel cleaning of the guide rails and racks for a longer period of time. Each cutting machine takes about several hours of equipment maintenance time. Employee maintenance and labor time is long, labor intensity is large, and equipment maintenance takes time, which reduces equipment utilization efficiency. According to statistics, in June 2013, before the TBM (full production and maintenance) project was fully carried out in the blanking workshop, the equipment mobility rate was only 74.32%.
Is there any way to increase the mobility of the equipment and reduce the labor intensity of the employees? After a series of discussions by the equipment security room engineer Chen Ke, the squad leader Feng Xiaofeng and the flame cutting machine director Zhu Zhiguo, the design concept of a tooling was released one week later. They add a tooling to the rear seat of the cutting machine, and the brush is placed on the front and side of the tooling. The tooling also has an automatic refueling device. When the rail needs to be oiled, it is only necessary to open the valve. Clean and add oil in one step, so that you only need to start the machine to run back and forth once, the rails are clean and can be lubricated and maintained at the same time.
After measurement and verification, the maintenance time of the equipment was significantly reduced, the daily maintenance time decreased by 67%, the weekly maintenance time decreased by 58%, and the equipment failure rate was also significantly reduced. The mobility of the equipment increased from 74.32% in June to 82.62 in December. %, making the workshop TPM project achieve its goal successfully.
At the conference of the excellent improvement case of the concrete machinery company in the quarter, the design of the cutting machine cleaning tool won the second prize of the branch's “Excellent Improvement Proposalâ€. The employees of the workshop were encouraged and also brainstormed and innovated.
(Finish)