Rated voltage: 220-240V 50-60Hz, 110-120V 50-60Hz 12VAC & VDC; 24VAC & VDC (EU) Power : 5 - 6 watt at 230V Coil insulation: Class F (Max 140°C wire operating temperature) Ambient temperature: 85°C maximum according water temperature & duty cycle Water temperature: 90°C maximum according water temperature & duty cycle Operating duty cycle: Tu 25°C, Tm 90°C & Tu 60°C, Tm 25°C, continuous (100%ED) (220-240V) Tu 25°C, Tm 90°C, 3 minutes ON, 5 minutes OFF Operating pressure range: 0.2 to 10 bar Flow regulator (optional): 0.25 to 17 litre/minute Fluid Water Insulation: Class II to water. No grounding required Coil terminals: Two 6.35x0.8mm male tabs terminals, RAST2.5 Agency approvals: Upon request: CQC, ENEC, UL (WRAS for Hydra) Internal leakage Maximum 1 drop/minute on pressure range 0.2 to 10 bar External leakage 10 bar  / 10 min Burst Pressure 80 bar FLOW Litre/min Tolerance  FLOW Litre/min Tolerance 2,5 15%  0.25 +/-0.1 3 15%  0.35 +/-0.1 3.5 15%  0.50 +/-0.15 3.75 15%  0.65 +/-0.25 4 15%  0.80 +/-25% 5 15%  1.2 +/-25% 5.5 15%  1.3 +/-25% 6 15%  2 +/-25% 7 15%  2.5 +/-20% 8 15%  3.3 +/-20% 9 15%  3.8 +/-20% 10 15%  5 +/-15% 11 15%    12 15%    14.5 15%    15 15%    17 25%    Rated voltage: 220-240V 50-60Hz, 110-120V 50-60Hz 12VAC & VDC; 24VAC & VDC (EU) Power : 5 - 6 watt at 230V Coil insulation: Class F (Max 140°C wire operating temperature) Ambient temperature: 85°C maximum according water temperature & duty cycle Water temperature: 90°C maximum according water temperature & duty cycle Operating duty cycle: Tu 25°C, Tm 90°C & Tu 60°C, Tm 25°C, continuous (100%ED) (220-240V) Tu 25°C, Tm 90°C, 3 minutes ON, 5 minutes OFF Operating pressure range: 0.2 to 10 bar Flow regulator (optional): 0.25 to 17 litre/minute Fluid Water Insulation: Class II to water. No grounding required Coil terminals: Two 6.35x0.8mm male tabs terminals, RAST2.5 Agency approvals: Upon request: CQC, ENEC, UL (WRAS for Hydra) Internal leakage Maximum 1 drop/minute on pressure range 0.2 to 10 bar External leakage 10 bar  / 10 min Burst Pressure 80 bar FLOW Litre/min Tolerance  FLOW Litre/min Tolerance 2,5 15%  0.25 +/-0.1 3 15%  0.35 +/-0.1 3.5 15%  0.50 +/-0.15 3.75 15%  0.65 +/-0.25 4 15%  0.80 +/-25% 5 15%  1.2 +/-25% 5.5 15%  1.3 +/-25% 6 15%  2 +/-25% 7 15%  2.5 +/-20% 8 15%  3.3 +/-20% 9 15%  3.8 +/-20% 10 15%  5 +/-15% 11 15%    12 15%    14.5 15%    15 15%    17 25%    Semi-automatic Potato Chips Production Line Semi-Automatic Potato Chips Production Line,Semi Automatic Potato Chips Production Line,Small Scale Chips Making Machine,Sweet Potato Production Line Zhucheng Lijie Food Machinery Co., Ltd. , https://www.ljfoodbeverage.com
The flow is regulated on the pressure range from 1 to 10 bar.
If no flow regulator is used, the appliance must warranty that the flow rate will never be higher than 20 litre/minute
New solenoid design, expanding applications for the valve.
Global standardization of the manufacturing process and equipment as well as the product design, ensuring there is not variation of quality or performance allowing you to source the Hydra valve wherever and whenever you need it.
The flow is regulated on the pressure range from 1 to 10 bar.
If no flow regulator is used, the appliance must warranty that the flow rate will never be higher than 20 litre/minute
New solenoid design, expanding applications for the valve.
Global standardization of the manufacturing process and equipment as well as the product design, ensuring there is not variation of quality or performance allowing you to source the Hydra valve wherever and whenever you need it.
Flow rate is an instantaneous value, measured after 60 seconds of stabilization.Â
Flow rate is an instantaneous value, measured after 60 seconds of stabilization.Â