Single effect Fiber Separator is used for removing all kinds of impurities in waste paper according to different specific gravity of fibers.It owns combined functions of defibering, separating and coarse screening.It is equipped after hydrapulper a secondary pulping and separating equipment. Also it can be used as tailings process equipment.
Fiber Separator Fiber Separator,Fiber Mill Equipment,Fiber Processing Equipment,Hemp Fiber Processing Equipment DanDong GaoXin Dryer Manufacturing Co.,Ltd , https://www.gaoxinpapermachine.com
Contamination of impurities: In the process of the purity test, the seeds have certain restrictions on the impurities, and the content of impurities increases, affecting the utilization of the seeds, and there is a certain influence on the seedlings of the seeds.
Seed maturity: Seed maturity mainly affects the 1000-grain weight of seed, which affects the fullness of the seed.
Seed moisture: Through tests, the moisture requirements of each seed are different. When the moisture exceeds the specified requirements, the clarity test cannot achieve the required specifications no matter how the operation is performed. The moisture content below the specified requirement is quickly and simply achieved. Clarity requirements, just in time, as long as the certification in the inspection process to do a careful inspection, can barely meet the requirements.
The netness instrument used is a blast type netness meter. Its working principle is: using seed weight and aerodynamic principles for wind selection; according to the seed width and thickness size difference sieve hole selection, at a certain flow rate Under the wind and the air volume, the lighter grain and grain seeds were selected, and then the seeds with twigs (commonly known as Zengtougu) and heavy impurities were selected through a certain screen shake. However, the relatively small volume of this cleanness instrument is not suitable for industrial applications, and it is more convenient to use the seed cleanness operation in the laboratory.
During the operation, preliminary measurements can be performed with a smaller wind speed, and further clarity can be determined by increasing the wind speed.
Factors affecting the clarity of the analysis of the degree of clarity and instrument selection There are three main factors affecting the clarity of the seed: one is the mixing of impurities at harvest; the second is the difference in seed maturity; and the third is the seed moisture content. The test of seed's clarity can use the seed clarity workbench and the use of a blast cleanness meter. How does the above three aspects affect the clarity?