Electric hydraulic portable light weight portable volume small far-light screw steel hand-held Steel Bar Cutting Machine
The steel Bar Cutting Machine is a kind of tool used to shear steel bars. Portable Rebar Cutter,Rebar Cutter,Electric Rebar Cutter,Hydraulic Rebar Cutter Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com
A: Brushless gearless motor: No gear means reliable, quiet, high efficiency, long working life, maintenance free.
B: Built-in controller: No messy exposed wirings, less connection problems, easy to install, neat looking products.
C: Strong climbing torque: Acheived by using strong rare earth magnets, innovative motor design, and top quality MOSFETS used.
D: Open voltages 24/36/48VDC: User adjustable power and speed, self upgradable from 24V to 48V to meet local regulations.
E: Built-in cooling fan: Effective heat dissipating, better performance for motor and controller, higher climbing capability.
F: Programmable controller: Control parameters programming via USB cable, customizable for different EV applications.
Contents
1. Magic Pie 3 motor
(Brushless&Gearless with Built-in controller)
2. All-in-one integraged Cable with Thumb or Twist Throttle with Battery gauge, Brake levers, Cruise control button.
24V/36V/48V 250/750/1000W
(16''/18''/20''/24''/26''/28"/700C Spoked Double Wall Rim)
Key features:
1. 30% higher climbing Torque
(Max: >70N. M)
2. Easy replaceable Internal controller with upgraded mosfets, No more messy wiring with new built-in controller
3. Better heat dissipating with Self-Cooling Fan, removing 60% heat
4. Water-proof integral wiring set with Silver plated Plug-pins for easy connection
5. Upgrade Mosfet with 35A continuous current
6. Dual control mode for sensor and sensorless
7. Multi-Voltage accept 24V/36V/48V
8. Regenerative braking
9. Cruise speed control
10. PC progarmable
11. Forward/Reverse available
Gross Weight: 11kg
Measurement:
45cm*30cm*45cm(16''/18'')
53cm*24cm*53cm(20'')
58cm*24cm*64cm(24''/26'')
70cm*24cm*66cm(700c/28'')
Optional Accessary:
Li-on Batter and Charger; Disc Break&Activator; PAS; 6/7-Speed Cassette (SHIMANO)
What Make SmartPie and MagicPie No. 1 Bike Conversion Kits
A: Brushless gearless motor: No gear means reliable, quiet, high efficiency, long working life, maintenance free.
B: Built-in controller: No messy exposed wirings, less connection problems, easy to install, neat looking products.
C: Strong climbing torque: Acheived by using strong rare earth magnets, innovative motor design, and top quality MOSFETS used.
D: Open voltages 24/36/48VDC: User adjustable power and speed, self upgradable from 24V to 48V to meet local regulations.
E: Built-in cooling fan: Effective heat dissipating, better performance for motor and controller, higher climbing capability.
F: Programmable controller: Control parameters programming via USB cable, customizable for different EV applications.
Contents
1. Magic Pie 3 motor
(Brushless&Gearless with Built-in controller)
2. All-in-one integraged Cable with Thumb or Twist Throttle with Battery gauge, Brake levers, Cruise control button.
24V/36V/48V 250/750/1000W
(16''/18''/20''/24''/26''/28"/700C Spoked Double Wall Rim)
Key features:
1. 30% higher climbing Torque
(Max: >70N. M)
2. Easy replaceable Internal controller with upgraded mosfets, No more messy wiring with new built-in controller
3. Better heat dissipating with Self-Cooling Fan, removing 60% heat
4. Water-proof integral wiring set with Silver plated Plug-pins for easy connection
5. Upgrade Mosfet with 35A continuous current
6. Dual control mode for sensor and sensorless
7. Multi-Voltage accept 24V/36V/48V
8. Regenerative braking
9. Cruise speed control
10. PC progarmable
11. Forward/Reverse available
Gross Weight: 11kg
Measurement:
45cm*30cm*45cm(16''/18'')
53cm*24cm*53cm(20'')
58cm*24cm*64cm(24''/26'')
70cm*24cm*66cm(700c/28'')
Optional Accessary:
Li-on Batter and Charger; Disc Break&Activator; PAS; 6/7-Speed Cassette (SHIMANO)
There are automatic steel cutting machine and semi-automatic steel cutting machine.
It is one of the necessary equipment for steel rebar processing, and it is mainly used to cut off the length of rebar in buildings, Bridges, tunnels, power stations and large water conservancy projects.
Compared with other cutting equipment, steel bar cutting machine has the characteristics of light weight, low energy consumption, reliable operation and high efficiency.
There are automatic steel cutting machine and semi-automatic steel cutting machine.
The fully automatic cutting machine, also called electric cutting machine, is used to control the cutting knife incision through motor transformation into kinetic energy to achieve the effect of shearing steel.
While semi-automatic is manual control of the incision, so shear reinforcement operations.
And more should belong to hydraulic steel bar cutting machine bar cutting machine is divided into charging type and portable two categories.
Electric hydraulic steel bar cutting machine mainly consists of motor, hydraulic transmission system, control device, fixed blade and so on.
Working principle: the motor drives the eccentric shaft to rotate, the eccentric surface of the eccentric shaft to back and forth motion with the plunger in contact with it, so that the plunger pump produces high pressure oil into the cylinder body, drives the piston in the oil cylinder, drives the moving blade forward, and cuts off the steel bar by phase with the fixed blade fixed on the support.
The hydraulic system of manual hydraulic steel bar cutting machine is composed of piston, plunger, hydraulic cylinder, pressure lever, pin pulling, reset spring, oil storage barrel and drain and oil suction valve.
Model NO.: MAGIC PIE 3 KIT (Internal Controller)
Voltage of Battery: 48V
Power: 1500-200W
Certification: CE
Maximum Loading Capacity: ≥120kg
Wheel Hub: Lightweight Alloy Hubs
Wheel Size: 16′′/18′′/20′′/24′′/26′′/28"/700c
Folded: Unfolded
Charging Time: <6h
Part: E-Bike Kit
Controller: Brushless Programmable Internal Controller
Fan: Self -Cooling Fan
Throttle: Twist or Thumb Throttle
Crusie Control Button: Crusie Control Button
Gross Weight: 11kgs
Trademark: Golden Motor
Specification: CE, ISO9001
Origin: China
HS Code: 871410009
Model NO.: MAGIC PIE 3 KIT (Internal Controller)
Voltage of Battery: 48V
Power: 1500-200W
Certification: CE
Maximum Loading Capacity: ≥120kg
Wheel Hub: Lightweight Alloy Hubs
Wheel Size: 16′′/18′′/20′′/24′′/26′′/28"/700c
Folded: Unfolded
Charging Time: <6h
Part: E-Bike Kit
Controller: Brushless Programmable Internal Controller
Fan: Self -Cooling Fan
Throttle: Twist or Thumb Throttle
Crusie Control Button: Crusie Control Button
Gross Weight: 11kgs
Trademark: Golden Motor
Specification: CE, ISO9001
Origin: China
HS Code: 871410009
What Make SmartPie and MagicPie No. 1 Bike Conversion Kits