The fire truck, also known as the fire engine, is specially used for fire or other emergency using vehicles. Fire engines can be classified according to the functions of water tank fire truck, foam fire truck, agricultural fire truck, fire fighting and sprinkling truck and other special using vehicles. Fire engines usually stationed at the fire station, met the alarm by firemen to drive the scene. SINOTRUK HOWO series fire truck chassis modified liquid carrying capacity of 8 tons, 12 tons, 16 tons of water tankers, foam fire truck and other products.
Fire Fighting Truck with fire trucks and sprinkler functions, range and pressure can reach the same level as the fire truck,
suitable for landscaping, fire sprinkler, fire fighting, mine dust, living area fire, power plant fire.
Fire Fighter Truck,Rescue Fire Fighting Truck,Howo Fire Fighting Trucks,Sinotruk Fire Truck SINOMICC INTERNATIONAL , https://www.rockstartyre.com
KINKAI third generation heat pump dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator, circulating hot-air assures uniform drying and high efficiency.
Model:Â Â JK03RD, JK06RD, JK12RD
Power Supply:Â Â 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source +Â 25% electric power
Max. Temp:  75ºC
Working Temp:  -10~45ºC
Functions:Â Â Heating /Â Cooling /Â Dehumidify
Dryer Type:Â Â Batch Type
Â
KINKAI Heat Pump Fruit Dryer Working Principle
KINKAI heat pump dryer operates according to a basic reverse Carnot cycle. The working fluid(refrigerant) at low pressure is vaporized in the evaporator, by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high- pressure. Heat is removed from working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line(using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
Features of KINKAI Fruit Dryer:
1. Adopt close dehumidify +Â circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2. PLC +Â Touch Screen, operating easily; can setting different drying curve, Suitable for drying different materials.
3. Second waste heat recovery technology (patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, the heat efficiency is high and energy is saved.
4. By using the forced ventilation function, there are the adjustable air distribution plates inside the oven. The materials can be dried uniformly.
5. The temperature: hot air heating 10-75°C, max 75°C.
6.  The baking plate dimensions and materials can customize as customer request.
7. During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good dehydration, keep nutrient content;
8. Safe and reliable operation, automatic intelligent control, 24-hour continuous drying.
Technical Parameters of KINKAI Fruit Dryer
Double Dryers +Â Drying Chamber
Model
Unit
JK03RD (x2)
JK06RD (x2)
JK12RD (x2)
Power Input
KW
9.6
17
30
Power Supply
V/PH/HZ
380V/3PH, 50/60HZ
380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current
A
19.2A(380V), 44A(220V)
34
60
Heating Capacity
KW
21
42
84
Cooling Capacity
KW
15.6
36
64
Dehumidify
L/H
24
50
100
Max. Temperature
ºC
≤75
≤75
≤75
Working Condition
ºC
0-43
0-43
0-43
Electric Shock Protection Grade
I
I
I
Max. Exhause Pressure
Mpa
3
3
3
Noise
dB(A)
≤75
≤75
≤75
Power Consumption/ H
KWH
9.6
17
30
Electric Heater
KW
6
12
24
Blowing Type
/
Horizontal Blowing 360ºC
Dimension Of Dryer
MM
1675x860x1280
1760x1060x1280
2120x1360x1590
Weight
KG
295x2
385x2
540x2
Recommend Dryer+Drying Chamber Sizes
Item
Description
Product Capacity
Drying Chamber size
1
One unit JK03RD dryer +Â drying chamber
300Kg /Â batch
4000*2000*2200mm
2
One unit JK06RD dryer +Â drying chamber
600Kg /Â batch
6000*2800*2200mm
3
One unit JK12RD dryer +Â drying chamber
1000Kg /Â batch
6000*3000*2200mm
4
Two units JK03RD dryers +Â drying chamber
800Kg /Â batch
7000*2200*2200mm
5
Two units JK06RD dryers +Â drying chamber
1500Kg /Â batch
10000*2800*2200mm
6
Two units JK12RD dryers +Â drying chamber
2500Kg /Â batch
10000*3000*2200mm
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Â
Meline
Add: Huadu District, Guangzhou City, Guangdong Province, P.R. China
Phone: +86-13697409461
Â
Â
Â
Â
Model NO.: JK03RD
Heat Energy: 25% Electricity+75% Air Source (Free)
Drying Temperature: 10~75c
Drying Capacity: 800 Kg Per Batch
Heating Capacity: 12~35kw
Cooling Capacity: 7.5~25kw
Dehumidify Amount: 12~100 L/H
Control: Touch Screen Control
Patent Technology: Second Waste Heat Recovery Technology
Trademark: KINKAI
Transport Package: Plywood
Specification: 1675x860x1280mm
Origin: China
KINKAI Heat Pump Fruit Dryer Introduction: