One of the main mineral in nature, in addition to outside molybdenite, molybdenum lead ore also containing molybdenum. For example, the flower buds in Hunan, China, and the Klimex in the United States all contain molybdenum-lead ore. Oxidized mineral (native) sulfide mineral (secondary) sulfide mineral Molybdenum, % 98.6 0.25 Lead, % 90.3 5.86 Molybdenum is mainly found in color molybdenum-lead ore (PbMoO 4 ), lead is mainly molybdenum-lead ore, and a small amount is galena. The chemical composition of the ore is as follows: element Mo Pb Zn Cu Fe Cd Ni % 0.43 1.8 0.046 0.063 0.41 0.001 0.001 element P S SiO 2 CaO MgO Al 2 O 3 　 % 0.015 0.044 10.42 52.32 0.3 2.38 　    Molybdenum-lead ore containing 0.43% Mo and 1.8% Pb was re-elected by shaker or re-elected by chute, yielding Mo 15.63%, Pb 54%, Zn 0.48%, Cu 0.016%, Fe 0.55%, Cd 0.001%, Ni The molybdenum-lead concentrate of 0.001%, P 0.015%, S 1.48%, SiO 2 6.21%, CaO 5.52% and Al 2 O 3 1.51% was further ground to 0.8 mm in the order of 90%. Lead concentrate ore molybdate and ammonium molybdate product Mo Pb Fe 2 O 3 Al 2 O 3 As Mn S Lead concentrate 0.52 6.34 0.57 0.78 0.22 <0.1 5.03 Sodium molybdate 39.22 <0.01 0.008 0.2 0.09 <0.01 0.19 Ammonium molybdate 56.1 <0.001 0.001 <0.005 <0.005 <0.001 <0.007 product CaO SiO 2 MgO P 2 O 5 Alkali metal Oxidation residue Lead concentrate 11.95 0.6 0.12 0.07 0.2 - Sodium molybdate 0.052 0.03 0.006 0.02 18.7 - Ammonium molybdate 0.002 0.001 0.001 0.005 0.008 0.012 The total recovery of molybdenum in sodium molybdate was 86.89%. The total recovery of lead in lead concentrate is 95.99%. The working principle of continuous coconut shell Carbonization Furnace,which is adopting advanced smoke-free and environment-friendly carbonization process.
The whole set of equipment consists of four parts:
1.incineration system
The system has applied for a number of patents, environmental protection, time saving, labor saving and energy saving.
Activated Carbon Equipment,Carbonization Furnace,Activation Furnace Equipment,Charcoal Machine Equipment Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com
A medium-sized oxidized hydrothermal molybdenum-lead deposit exists in the flower bud, and the molybdenum-lead ore contains Mo 0.4% and Pb 1.5-2.0% on average.
Characteristics of molybdenum ore lead ore density 4.5-4.8 g / cm 3. The main groups of minerals in the ore are:
The fine concentrate can be leached with nitric acid, hydrochloric acid, caustic soda, sodium sulfide, sulfuric acid and sodium carbonate, but the leaching effect is best with sodium sulfide. Use an excess of 1 times Na 2 S, 90 ~ 95 ° C, liquid to solid ratio of 2:1, leaching in a ф600 × 800 mm direct heat dip tank (0.6 tons / day). At this time, molybdenum is converted into sodium molybdate and lead is converted into artificial galena. The leachate is filtered, washed, solid-liquid separated, the filter cake is washed, filtered, and dried to obtain lead concentrate, and the filter-filtered filtrate is returned to the leaching operation. The leached filtrate is subjected to evaporation crystallization, centrifugal filtration, and the mother liquor is returned to the leaching operation, and the crystal of the centrifuge is dried to obtain sodium molybdate. A portion of sodium molybdate can also be converted to ammonium molybdate by ammonia leaching. The chemical analysis of the above products is shown in the following table:
3. Carbonization system
4. Control system
