Full-Automatic PET Blow Molding Machines
1. Introduction:
AK-20 blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
2. Features
(1)Blow molding machine is suitable for producing PET plastic containers and bottles from 50-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
(2)Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally.
(3The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
(4)The blow moulding machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
(5)The machine can be operated in the step-by-step mode and the semi-auto mode.
(6)The machine is small with low investment, easy and safe to operate.
Â
Item
AK-20/40/60
Bottle type specification
Cavity
2/4/6
Theory output
2000/4000/6000
Max.volume
2L
Bottle mouth maximum overall diameter
80mm
Bottle biggest diameter
100mm
Bottle maximum height
330mm
Power specifications
Light tube quantity
32pcs
Light tube power
0.75KW
Maximum heating power
24KW
Actual consumption
19KW
Air pressure specification
Work pressure
7-9kg/cm2
Blow bottle pressure
25-35kg/cm2
Higher -pressure gas consumption
1500Ltr/min
Machine specification
Size of the machine
2.25x1.6x1.7M
Weight of the machine
2.5ton