High Speed Small Hydraulic Motor Bmr Series for Industrial / Automotive

High Speed Small Hydraulic Motor BMR Series For Industrial / Automotive


INTRODUCTION OF GEROTOR HYDRAULIC MOTOR BMR SERIES:
 
BMR series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth. Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. Shaft seal can bear high pressure of motor of which can be used in parallel or series. Advanced construction design, high power and low weight.
 
 

 
 
PRODUCT INTRODUCE OF THE MOTOR IN THE PICTURE:
 
 Small Hydraulic Motors BMR series
 Manufacturer: HANJIU
 Model: BMR-5-b-2-a-2-a-a
 Replace Eaton Char-Lynn Gerotor Hydraulic Motor S, T, W
 Replace Danfoss Gerotor Hydraulic Motor OMR
 Replace M+S Gerotor Hydraulic Motor MR
 ReplaceWhite Cross Hydraulic Motor RE
 ReplaceSAM Brevini Hydraulic Motor BR
 

 
SPECIFICATIONS OF THE MOTOR IN THE PICTURE:
 Shaft Length: 40mm
 Shaft Diameter: 25.4mm
 Number of Ports: 2
 Number of Drain Port: 1
 Size of Ports: G1/2, G1/4
 
MODEL CROSSING:
 
MOTOR CROSS REFERENCE TABLE
 
HANJIU
HYDRAULIC    M+S
HYDRAULIC    EATON
CHAR LYNN    DANFOSS    ROSS
TRW    WHITE
CROSS    PARKER    SAM
BREVINI    BOSCH
RECROTH
BMM    MM MLHK    J SERIES    OMM                   BGM    MGX
BMP/BM1    MP HP    H SERIES    OMP DH    MF MG    WP RS    TC TE TB    BG    MGP GXP
BMR/BM2    MR HR MLHRW,RW    S,T SERIES W SERIES    OMR DS OMEW    MB    WR RE    TF    BR    MGR GMR
BMH/BM4    MH MLHH HW HWF         OMH    ME    RE    TG          
BMS/BM5    MS MSY MLHS    2000 SERIES    OMS    ME    RE    TG    HPR    MGS GMS
BMT/BM6    MT MLHT MTM    6000 SERIES    OMT TMT    MJ              HT    MGT,GMT
BMV    MV MLHV    10000 SERIES    OMV                        MGV GMV
 
 
 
MAIN SPECIFICATIONS:
 
Technical data for BMR with 25 and 1 in and 1 in splined and 28.56 tapered shaft:
Type    BMR
BMRS
36    BMR
BMRS
50    BMR
BMRS
80    BMR
BMRS
100    BMR
BMRS
125    BMR
BMRS
160    BMR
BMRS
200    BMR
BMRS
250    BMR
BMRS
315    BMR
BMRS
375
Geometric displacement (cm3 /rev.)    36    51.7    81.5    102    127.2    157.2    194.5    253.3    317.5    381.4
Max. speed (rpm)    cont.    1085    960    750    600    475    378    310    240    190    155
int.    1220    1150    940    750    600    475    385    300    240    190
Max. torque (N·m)    cont.    72    100    195    240    300    360    360    390    390    365
int.    83    126    220    280    340    430    440    490    535    495
peak    105    165    270    320    370    460    560    640    650    680
Max. output (kW)    cont.    8.5    9.5    12.5    13    12.5    12.5    10    7    6    5
int.    9.8    11.2    15    15    14.5    14    13    9.5    9    8
Max. pressure drop (MPa)    cont.    14    14    17.5    17.5    17.5    16.5    13    11    9    7
int.    16.5    17.5    20    20    20    20    17.5    15    13    10
peak    22.5    22.5    22.5    22.5    22.5    22.5    22.5    20    17.5    15
Max. flow (L/min)    cont.    40    50    60    60    60    60    60    60    60    60
int.    45    60    75    75    75    75    75    75    75    75
Weight (kg)    6.5    6.7    6.9    7    7.3    7.6    8    8.5    9    9.5
 
Technical data for BMR with 31.75 and 32 shaft:
Type    BMR
BMRS
36    BMR
BMRS
50    BMR
BMRS
80    BMR
BMRS
100    BMR
BMRS
125    BMR
BMRS
160    BMR
BMRS
200    BMR
BMRS
250    BMR
BMRS
315    BMR
BMRS
375
Geometric displacement (cm3 /rev.)    36    51.7    81.5    102    127.2    157.2    194.5    253.3    317.5    381.4
Max. speed (rpm)    cont.    1250    960    750    600    475    378    310    240    190    155
int.    1520    1150    940    750    600    475    385    300    240    190
Max. torque (N·m)    cont.    72    100    195    240    300    380    450    540    550    580
int.    83    126    220    280    340    430    500    610    690    690
peak    105    165    270    320    370    460    560    710    840    830
Max. output (kW)    cont.    8.5    9.5    12.5    13    12.5    12.5    11    10    9    7.5
int.    9.8    11.2    15    15    14.5    14    13    12    10    9
Max. pressure drop (MPa)    cont.    14    14    17.5    17.5    17.5    17.5    17.5    17.5    13.5    11.5
int.    16.5    17.5    20    20    20    20    20    20    17.5    15
peak    22.5    22.5    22.5    22.5    22.5    22.5    22.5    22.5    21    17.5
Max. flow (L/min)    cont.    45    50    60    60    60    60    60    60    60    60
int.    55    60    75    75    75    75    75    75    75    75
Weight (kg)         6.5    6.7    6.9    7    7.3    7.6    8    8.5    9    9.5
* Continuous pressure:Max.value of operating motor continuously.
* Intermittent pressure:Max.value of operating motor in 6 seconds per minute .
* Peak pressure:Max.value of operating motor in 0.6 second per minute.

  
 
MARKETS WE SERVE:
 Ground care, Sweeping and Mowing machinery
 Forestry wood processing and cutting
 Agricultural planting
 Farmland irrigation winch
 Winch Wood from deforestation
 Construction machinery and platform
 Pilling machines
 Oceanographic research winch
 Nautical equipment and winches for fishing boats
 Towing and mooring winches

Shijiazhuang HanJiu technology co., LTD., is specialized in the production of BM series cycloid hydraulic motor, the BZZ redirector enterprise, my factory has dozens of high-quality, professional engineering and technical personnel, and more than in 2010, has introduced the most advanced production equipment, is in northern China's largest factories, production of more than 300000 units a year.
My factory specializes in designing and producing the motors and steering gear of any type, from large to small, from low to high, and so on. And can replace danfoss, Eaton, M+S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
My factory take the good faith first, quality first for the purpose, from the employee on-boarding, raw materials into the factory, from parts processing, assembly proposal until products, has a relatively perfect system of product quality. And through CE certification. Our factory is dedicated to the establishment of an internationally renowned brand, looking forward to the long-term cooperation with more demand of hydraulic products.





Please do not hesitate to contact us for further information, inquiries or orders.

Thank you for choosing 'Hanjiu' Hydraulics.

Sales manager: Alyssa Lee
Shijiazhuang Hanjiu Technology Co., ltd | Add: No.368, Youyi Street, Xinhua District,Shijiazhuang city, Hebei, China | | www.hjhydraulic.com | www.orbithydraulic-motor.com | Tel: 0086 311 68123061