Gravity Ore Processing Plant or Ore washing plant is a relatively environmental solution compared to Flotation Process, this solution is to separate the ore from its gangue by gravity differences. After grinding and classifying, the ore is liberated from the gangue, but their gravity is different, so the ore can be separated by adding water. From the introduction we can find that gravity ore dressing solution mainly used to mines with heavy specific gravity in water, sometimes it can be used for pre-processing to remove some impurities, such as clay, to increase the efficiency and higher concentrate grade.
Gravity Processing Plant,Gravity Separator,Gravity Separation,Gravity Processing Machine Henan Mingyuan Heavy Industrial Machinery Company Co., LTD. , https://www.heavyequipmentchina.com
1. Indicator: Multi-function position indicator with NAMUR standard mounting groove, you can easily install a variety of accessories, such as the valve positioner, limit switches.
2. Output shaft: High-precision one-piece gear output shaft made of nickel-plated alloy steel, in line with ISO5211, DIN337, NAMUR standards. Can be customized according to user requirements size, and stainless steel for choice.
3. Cylinder: ASTM6005 extruded aluminum cylinder body, with hard oxidation, optional epoxy coating PTFE coating or nickel plating and other surface treatment.
4. End cap: Die-cast aluminum alloy end cap with metal powder coating of various colors, PTFE coating or nickel plating.
5 Pistons: Double piston rack, made of cast aluminum hard oxide or cast steel galvanized, the installation position symmetrical, fast action, long service life, easy to reverse the piston can change the direction of rotation.
6. Stroke Adjustment: External two independent stroke adjustment screw can be easily and accurately in both directions ± 5 ° adjust the open and close position.
7. High-performance spring: Combined preload spring using high-quality materials, coating treatment, pre-press assembly. Has strong corrosion resistance and long service life. It is safe and easy to disassemble the single-acting actuator and change the number of springs to satisfy different torque output range.
8. Bearings and guides: the use of low-friction, long-life composite materials, to avoid direct contact between metal and metal, easy maintenance and replacement.
9. Sealing: O-ring at room temperature using nitrile rubber, high temperature or low temperature with fluorine rubber or silicone rubber.
1. Indicator: Multi-function position indicator with NAMUR standard mounting groove, you can easily install a variety of accessories, such as the valve positioner, limit switches.
2. Output shaft: High-precision one-piece gear output shaft made of nickel-plated alloy steel, in line with ISO5211, DIN337, NAMUR standards. Can be customized according to user requirements size, and stainless steel for choice.
3. Cylinder: ASTM6005 extruded aluminum cylinder body, with hard oxidation, optional epoxy coating PTFE coating or nickel plating and other surface treatment.
4. End cap: Die-cast aluminum alloy end cap with metal powder coating of various colors, PTFE coating or nickel plating.
5 Pistons: Double piston rack, made of cast aluminum hard oxide or cast steel galvanized, the installation position symmetrical, fast action, long service life, easy to reverse the piston can change the direction of rotation.
6. Stroke Adjustment: External two independent stroke adjustment screw can be easily and accurately in both directions ± 5 ° adjust the open and close position.
7. High-performance spring: Combined preload spring using high-quality materials, coating treatment, pre-press assembly. Has strong corrosion resistance and long service life. It is safe and easy to disassemble the single-acting actuator and change the number of springs to satisfy different torque output range.
8. Bearings and guides: the use of low-friction, long-life composite materials, to avoid direct contact between metal and metal, easy maintenance and replacement.
9. Sealing: O-ring at room temperature using nitrile rubber, high temperature or low temperature with fluorine rubber or silicone rubber.
Model NO.: AT32-AT400
Trademark: Standard Trademark or Customized
Specification: AT32-AT400
Origin: China
HS Code: 8412390000
Model NO.: AT32-AT400
Trademark: Standard Trademark or Customized
Specification: AT32-AT400
Origin: China
HS Code: 8412390000