Axial Flow Pumps have lower heads but higher flow rates and are extremely versatile in low lift areas. The axial Flow Pump is divided into three types: vertical, horizontal and inclined, and its basic structure is the same. The impeller is fixed to the lower end of the pump shaft. There are usually 4 to 5 blades on the impeller. The blades are available in fixed, semi-adjustable and fully adjustable versions. The latter two can adjust the mounting angle of the blades within a certain range for efficient operation. The blades are bolted to the hub, the base of the blade is engraved with a reference line, and the hub has several mounting angular positions. The adjustment method is as follows: first remove the impeller, loosen the bolts, mobilize the blades to align the reference line with the required angular position line, and then tighten the bolt. This adjustment method is called semi-adjusting. The full adjustment is achieved by a special adjustment mechanism to adjust the blade mounting angle. The role of the guiding impeller is to convert the kinetic energy of the rotary motion of the impeller outlet liquid into pressure energy to avoid the impact and vortex loss caused by the rotation of the liquid. Axial Flow Pumps Axial Flow Pumps,Mechaincal Seal Pump,Skf Bearing Pump,Overflow Elbow Pump Sichuan Zigong Industrial Pump Co.,Ltd. , https://www.zgpump-global.com
(Image from the network, invade)
China Instrument Network Instrument R&D On November 1, 2017, Prof. Pan Jiaoqing of the Institute of Semiconductors, Chinese Academy of Sciences undertook the launch of the National Advanced Research and Development Program for Strategic Advanced Electronic Materials “Active Infrared Gas Sensing Materials and Devices and Applicationsâ€. It will be held in Beijing Xijiao Hotel. The conference was hosted by us under the guidance of the High Technology Research and Development Center of the Ministry of Science and Technology. Director of the Material Department of High-tech Research and Development Center of the Ministry of Science and Technology, Director Shi Dongmei, Special Director Yang Bin, Project Responsibility Expert and Consultant, and our leaders and project team members attended the meeting.
The meeting was presided over by Director of Coastal Defense, Department of Scientific Research Management and Quality Control. First of all, the deputy director of Zhu Ninghua led the project leader to lead a welcoming speech, and issued a letter of appointment for project consultants attending the meeting. He extended a warm welcome to the arrival of the representatives of the leaders of the Ministry of Science and Technology, experts and cooperating units, and thanked the Ministry of Science and Technology for high technology. Research and development center's support for the semiconductor institute will provide full support to ensure the successful completion of the project task.
Next, Shi Dongmei, director of the Department of High Technology Research and Development Center, spoke and congratulated the launch of the project. She pointed out that the lead unit of the project must conscientiously perform corporate responsibility, strengthen organization and expense management of project implementation, and ensure risk prevention and pre-judgment in order to better accomplish project tasks.
The project leader Pan Jiaoqing's research team introduced the project's overall situation and project implementation plan on behalf of the project team. The project studies high-performance infrared active light sensing materials and devices, and builds a detection system that simultaneously detects multiple gases based on tunable semiconductor laser absorption spectroscopy (TDLAS), and realizes its demonstration applications in environmental monitoring, industrial safety, and other fields. .
Academician Wang Qi of the Institute of Semiconductors, Professor Liu Qingju of Yunnan University, Zhou Bin Senior Engineer of Datang Telecom, Yu Libo of Southwest Institute of Technology and Technology, Prof. Ma Xiaohui of Changchun University of Science and Technology, Prof. Chu Cunzhu of Changchun Institute of Optics and Technology, Researcher of Institute of Semiconductors Lu Tieliang, and Guo Xuqiang of Petroleum University Prof. Yan Fengping from Beijing Jiaotong University, Prof. Guo Yuansheng from the Electronic Components Industry Development Research Center of the Ministry of Industry and Information Technology, and other project consultants put forward many valuable opinions on the implementation of the project. The experts proposed that the project should pay attention to the unit's time and task node convergence. The experts all agreed that the project runs through the entire industrial chain of laser material research, sensor research and demonstration engineering, and provides high-end sensing materials and devices for gas detection in automotive exhaust gas and natural gas industries, and promotes technology upgrading in the sensing industry.
Director Yang Bin, the special director of the High Technology Center, focused on the special management situation, and introduced in detail the overall situation of the project, project deployment, key special management plans, key special management, problems and causes in project implementation, supervision and credit management.
Also participating in the conference were Professor Chen Hongda, the head of the Expert Group on Strategic Advanced Electronic Materials, Zhang Xiaoxue, Director of the Finance Department, and Su Xiaohu, a research fellow in the Department of Scientific Research Management and Quality Control.
(Original title: The key project of strategic advanced electronic materials "Active infrared gas sensing materials and devices and applications" project kick-off meeting)