Jining Union Machinery And Parts Co.,Ltd
mainly produces water tanks,radiators,oil coolers, intercoolers for all brands
excavators. The Excavator radiators are important parts of the engine.
Model:
Iron Water Tank/Oil Cooler/ Radiato for Excavatorr
Aluminum Water Tank/Oil Cooler/ Radiator For Excavator
Copper Water Tank /Oil Cooler/ Radiator for Excavator
Type:
Plate Fin Water Tank /Oil Cooler/ Radiator for Excavator
Pipe Water Tank /Oil Cooler/ Radiator for Excavator
For Komatsu: PC200-7 PC220-7 PC360-7 PC300-7 PC200-6 PC228UUS PC200-8 PC56 PC200-5 PC200-8 PC450-7 PC300-3 PC228 PC50-7 PC120-6US PC100-6/PC120-6 PC100-5/PC120-5 PC220-6 PC400-5/6 PC600-6 PC200 PC200-3 PC60-7 PC200-6 PC78US PC270-8 PC130-7
Excavator Radiator,Radiator For Excavator,Excavator Water Radiator,Excavator Oil Radiator JINING UNION MACHINERY AND PARTS CO., LTD. , https://www.vmpmachineryparts.com
Advanced sludge Dewatering systemÂ
In order to meet the requirement of advanced sludge dewatering, drying and final treatment and reach the targets of sludge reduction and resourcelization, established the solution of ELASPRESS advanced sludge dewatering system.
This system can help to reduce the water content of sludge to less than 60% for subsequent drying or resourcelization. Treated sludge can be landfilled or burnt directly or used for greening, brick making or used as fuel and organic fertilizer etc. In order to realize low cost resourcelization.
The core of this system is to mix the raw sludge with special modifier quickly and evenly in the modifying reactor after concentrated via the integrated equipment and engineering works of the system as well as the multi-plate screw press in order to make the discharged sludge meet the modification requirement. The mixture will be pumped into an elastic volume pressure pressing system for deep dewatering and make the water content of the sludge be less than 60% for subsequent drying or resourcelization. The sludge, after deep dewatering, can be dried continuously for reaching the water content of 40-
The integrative ELASPRESS sludge advanced dewatering system features small floor area, high efficiency, high capacity as well as low cost for capital construction, operation, transportation and retreatment. No heat source and fuel are needed for this deep dewatering system. The treated sludge can meet the corresponding national standard and be landfilled, burnt or resourcelized directly.
Model selection of ELASPRESS sludge dewatering system
Model
Capacity
(20 hr/d)Scale of WWTP
(t/d)Â Floor area
Total power
Operating power
FL-01
1t-DS/day
5000-8000
8×8
35.6
16
FL-02
2t-DS/day
10000-15000
10×10
37.7
20
FL-04
4t-DS/day
20000-30000
12×10
52.2
30
FL-10
10t-DS/day
50000-80000
16×10
79.0
44
FL-20
20t-DS/day
100000-150000
20×10
120.3
70
Advanced sludge Dewatering systemÂ
In order to meet the requirement of advanced sludge dewatering, drying and final treatment and reach the targets of sludge reduction and resourcelization, established the solution of ELASPRESS advanced sludge dewatering system.
This system can help to reduce the water content of sludge to less than 60% for subsequent drying or resourcelization. Treated sludge can be landfilled or burnt directly or used for greening, brick making or used as fuel and organic fertilizer etc. In order to realize low cost resourcelization.
The core of this system is to mix the raw sludge with special modifier quickly and evenly in the modifying reactor after concentrated via the integrated equipment and engineering works of the system as well as the multi-plate screw press in order to make the discharged sludge meet the modification requirement. The mixture will be pumped into an elastic volume pressure pressing system for deep dewatering and make the water content of the sludge be less than 60% for subsequent drying or resourcelization. The sludge, after deep dewatering, can be dried continuously for reaching the water content of 40-
The integrative ELASPRESS sludge advanced dewatering system features small floor area, high efficiency, high capacity as well as low cost for capital construction, operation, transportation and retreatment. No heat source and fuel are needed for this deep dewatering system. The treated sludge can meet the corresponding national standard and be landfilled, burnt or resourcelized directly.
Model selection of ELASPRESS sludge dewatering system
Model
Capacity
(20 hr/d)Scale of WWTP
(t/d)Â Floor area
Total power
Operating power
FL-01
1t-DS/day
5000-8000
8×8
35.6
16
FL-02
2t-DS/day
10000-15000
10×10
37.7
20
FL-04
4t-DS/day
20000-30000
12×10
52.2
30
FL-10
10t-DS/day
50000-80000
16×10
79.0
44
FL-20
20t-DS/day
100000-150000
20×10
120.3
70
For Hitachi: ZAX200 ZAX330 EX200-2/3 ZAX210-3 ZAX300-3 ZAX300-1 EX100-1 EX200-5 ZAX120-6 EX120 EX120-5 EX200-1 EX300-5 EX300-1 EX300-3 EX220-5 ZAX60 EX450 EX220-2 EX60-5 EX30 ZAX240-3 EX135 EX400-5 EX1200.
For Cat : E320C E330D/E345 E320D E320 E307D E330 GAT330D E120B E329D.
For Kobelco: SK120 SK260-8 SK200-6 SK200-8 SK235 SK230-6E SK200-6E SK230-6E SK230-6E SK60-7 SK430-3 SK200-3 SK350 SK60C SK60 DH220-3 SK350-8 SK330-8 SK300-1
For Hyundai: R220-5 R150-9 R305-7 R350-9 R125
For Dawoo: DH225-7 DH60-7 DH55 DH300-7 DH220-7 DH220
For Kato: HD820-3 HD820-5 HD700-7 HD55-7
For Sumitomo: SH210-5 SH240-5 SH350-3
Model NO.: FL
Trademark: Flourish
Transport Package: Polywood Case
Specification: 3000*30000
Origin: China
HS Code: 8421219909
Model NO.: FL
Trademark: Flourish
Transport Package: Polywood Case
Specification: 3000*30000
Origin: China
HS Code: 8421219909