Recently, many rainy days, whether driving or parking, vehicles are more likely to enter the water situation. What should be done after the car is in the water?

Dongguan Zhicheng dealership maintenance department told reporters that when the car into the water, the battery negative line should be removed as soon as possible, so as not to cause a variety of electrical appliances on the car due to water and a short circuit; followed by an immediate inspection of the engine, First check whether the engine cylinder has water, the water will cause the connecting rod to be bent and damage the engine. Third, check whether there is water in the engine oil. The engine oil will cause deterioration of the engine oil, loss of lubrication, and excessive engine wear.

In addition, check whether the gearbox is filled with water. The gearbox inlet water will spoil gear oil in the gearbox and cause gear wear.

If the exhaust pipe enters water, remove the stagnant water as soon as possible to prevent impurities in the water from clogging the catalytic converter or damaging the oxygen sensor. If necessary, check that the battery is filled with water. Replace the electrolyte if necessary.

Plastic & Rubber Processing Machinery refers to general machinery, which manufacture and processing of rubber and plastic products.

The manchinery is used for EVA, PVC PE fpaming sole, rubber sole, TPR sole, rubber robber, rubber sponge, tyre, ball, rubber ring, rubber pipe, rubber belt, bottl stopper,oil seal, shock-resistant rubber, viscous adhesive tape, elastic tape, masterbatch, ink, electric rubber part, auto rubber product and chemical industrial blending materials.

18 inch refining mill

Advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard    and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long    service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device.  The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload.

The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The [U" shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

Main parameter:

Roller diameter (mm)

450

Roller length(mm)

1000

Front roller speed (m/min)

31.9

Speed ratio

1:1.27

Max roller gap(mm)

10

Nip adjustment

Manual

Mixing capacity(kg)

30-50

Power (kw)

55

Motor RPM(r/min)

980

Reducer ratio

35

Reducer model

375+

Gear width

input 70mm, output 140mm

Roller bearing diameter(mm)

300

Bearing model

352960YF

Bearing size(mm)

420×300×192

Machine size(mm)

4700x2000x1700

Machine weight(kg)

10000

Plastic & Rubber Processing Machinery

Plastic Processing Machinery,Rubber Processing Machinery,Processing Machine For Plastic,Processing Machine For Rubber

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , http://www.longxuanmachine.com