Sw-38 Dual Head Semi-Automatic Pipe Bending Machine

1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.

2. As it is controlled by microcomputer, it is easy to operate and maintain it.

3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.

4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.

5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.

6. One or two tubes can be bent in one time according to its size, material and outer diameter.

 

Standard accessories

1. One pair of mould, one set of retaining device

2. One set of common tools

3. The head can turn for 90° inside and outside
4.Selection guide

Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press.

Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.


7.Parts brand


8.Contact details
Contact:Miss Ashley
Tel.:0086-512-56395618
Mob.:0086-13812981703
 
 
Website:www.zjgly.net/en

1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.

2. As it is controlled by microcomputer, it is easy to operate and maintain it.

3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.

4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.

5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.

6. One or two tubes can be bent in one time according to its size, material and outer diameter.

 

Standard accessories

1. One pair of mould, one set of retaining device

2. One set of common tools

3. The head can turn for 90° inside and outside
4.Selection guide

Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press.

Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.


7.Parts brand


8.Contact details
Contact:Miss Ashley
Tel.:0086-512-56395618
Mob.:0086-13812981703
 
 
Website:www.zjgly.net/en

 Forklift parts investment casting is one branch of Alloy Steel Precision Casting, which is widely used in forklift markets. Precision casting of forklift parts adopts lost wax casting, also called investment casting.

 In wax pattern process,we mix stearic acid and paraffin wax. In wax pattern making, as you know, it is better than polyethylene, and the wax deformation is small. In dipping slurry process,most of the suppliers adopt water glass technics in domestic area,but we adopt compound technics or silica sol technics.

 In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at  24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.

 In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of.This can effectively avoid the air-hole and sand-hole,making the casting look much nicer.

 In smelt process,we use middle frequency furnace,avoiding the emergence of the oxide; in molten steel control part,we use Germany-imported direct reading spectrometer machine,assuring its quality before the molten steel out of the furnace.During this process we use ERP production and management software to get the feedback information.

 In shell-knock out process,we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.

 In shot-blasting process,we have crawler-type and hanging shot-blasting machine,with steel shot 0.5-0.8,making the products smooth.Of course,if the customer wants it look much nicer,we also can carry out sand-blast treatment.

 In heat treatment process,we use electric furnace,and adopt double-temperature control in order to heat the products equally.As a result, the products will have great metallurgical structure.

 Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.

  In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.

  Our forklift parts casting has quality assurance in accordance with ISO9001: 2008, strict material inspection and exact dimension control, with 100% quality control. OEM order is welcome. The parts can be made completely based on your specifications such as drawing, design, sample etc.

Investment Casting for Forklift Parts

Forklift Parts Investment Casting,Investment Casting for Forklift Parts,Forklift Parts Precision Castings,Precision Casting for Forklift Part

Wei fang junlong precision casting Co.,Ltd , http://www.junlongcasting.com