Model NO.: PSH-HBM
Trademark: SLJS
Origin: China(Mainland)
Model NO.: PSH-HBM
Trademark: SLJS
Origin: China(Mainland)
Product Features 
1) High perfomance servo motor: Short response time, high control accuracy, positioning accuracy can reach 0.001mm. 
2) Energy saving and enviromental protection: High speed servo motor
3) The noise decreased significantly:
  1. Large torque, machine work is soon and return speed faster, more efficient.  
2. Servo pump only provides the flow and pressure system is a working cycle of each stage needed. For example, in the working state, flow rate and pressure are close to zero.  
3. The energy saving effect can reach at least 50-60%, machine time is more long more remarkable energy-saving effect.  
4. Due to the absence of the main pressure value, thus reducing the fever. Hydraulic oil consumption can be redued greatly, as the general bending machine hydraulic flow 50%, save the maintenance cost of the machine, running cost saving considerable.  
5. Pump control noise reduction effect of electric and hydraulic drive system was, according to the different working conditions.  
6. Noise reduction in the range of 5-10dB, standby state is almost equal to zero. 
Main Configurations: 
1. Holland Delem DA56S CNC System
2. Germany Rexroth has Lego electro-hydraulic servo driven pump control system. 
3. Synchronous position on both sides with RSF grating detection. 
4. Back gauge with high perfomance servo motor and Ball Screw. 
5. The WILA mechanical CNC system control under the table the deflection compensation device. 
6. With a left and a right side door and door. 
7. With simple Linear Guide front support frame. 
Hydraulic Synchronized CNC Plate Bending Machine
Hydraulic Synchronized CNC Plate Bending Machine

Product Features 
1) High perfomance servo motor: Short response time, high control accuracy, positioning accuracy can reach 0.001mm. 
2) Energy saving and enviromental protection: High speed servo motor
3) The noise decreased significantly:
  1. Large torque, machine work is soon and return speed faster, more efficient.  
2. Servo pump only provides the flow and pressure system is a working cycle of each stage needed. For example, in the working state, flow rate and pressure are close to zero.  
3. The energy saving effect can reach at least 50-60%, machine time is more long more remarkable energy-saving effect.  
4. Due to the absence of the main pressure value, thus reducing the fever. Hydraulic oil consumption can be redued greatly, as the general bending machine hydraulic flow 50%, save the maintenance cost of the machine, running cost saving considerable.  
5. Pump control noise reduction effect of electric and hydraulic drive system was, according to the different working conditions.  
6. Noise reduction in the range of 5-10dB, standby state is almost equal to zero. 
Main Configurations: 
1. Holland Delem DA56S CNC System
2. Germany Rexroth has Lego electro-hydraulic servo driven pump control system. 
3. Synchronous position on both sides with RSF grating detection. 
4. Back gauge with high perfomance servo motor and ball screw. 
5. The WILA mechanical CNC system control under the table the deflection compensation device. 
6. With a left and a right side door and door. 
7. With simple linear guide front support frame. 
Hydraulic Synchronized CNC Plate Bending Machine
Hydraulic Synchronized CNC Plate Bending Machine

Ball Screw

Tai Shi Te Bearing Co., Ltd , http://www.jnballBearing.com